Distance Vector 썸네일형 리스트형 IP Routing - Distance Vector RIP Version Distance Vector routing algorithm - RIP Version RIP version 1 Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router rip Router(config-router)#network 10.0.0.0 Router(config-router)#end %SYS-5-CONFIG_I: Configured from console by console Router#show ip protocol Routing Protocol is "rip" Sending updates every 30 seconds, next due in 24 seconds Invalid aft.. 더보기 IP Routing - Distance Vector RIP Distance Vector routing algorithm - RIP Router 0 설정 Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int fa 0/0 Router(config-if)#ip add 172.16.1.1 255.255.255.0 Router(config-if)#no sh %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#exit.. 더보기 IP Routing - Dynamic routing RIP 이용 Router 0 설정 Router#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int se 0/0/0Router(config-if)#ip add 10.1.12.1 255.255.255.0Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/0/0, changed state to downRouter(config-if)#exitRouter(config)#int fa 0/0Router(config-if)#ip add 10.1.41.1 255.255.255.0Router(config-if)#no sh%LINK-5-CHANGED: Interface FastEthe.. 더보기 이전 1 다음
